With over 25 years experience lining tanks and bunds, Corroless Eastern have the knowledge and capability to engineer and successfully execute a tailored solution for your organisations tank and bund problems. Whether it is a 5,000m2 chemical tank lining or a 25m2 leaking containment bund, we will guide and advise you the client from design through completion to operation and maintenance. Corroless Eastern have the engineered solution for your containment needs.

When protecting your companies infrastructure with a tank lining or upholding your environmental obligiations with a bund lining it is essential that you receive the maximum return on your investment. Corroless Eastern understand that a successful tank lining or bund lining is so much more than two coats of paint. We pride ourselves on the standard and quality of our surface preparation, offering the complete range of tank lining and bund lining substrate preparation techniques, from mechanical preparation through to Abrasive Blasting. When applying our carefully designed and tested tank lining or bund lining specification we adhere to strict quality control and proven application procedures to give you the client 100% confidence in your investment.

We can supply the following: Abrasive blasting, Mechanical preparation, Chemical Reistant tank & bund linings, Potable water tank linings, Drinking Water tank linings, Rapid cure tank & bund lings, Polyurea tank & bund linings, Braithwaite tank linings, Resolve leaking tanks, Flexible tank & bund linings, GRP reinforced tank & bund linings, Warranted tank & bund linings, Rust stabilizing tank linings.

CASE STUDIES

Portable Water Tank Lining »

The original protective coating on the tank internals had failed, resulting in a heavily corroded substrate. The rough, pitted and unhygienic surface this provided would support the growth of aquatic micro organisms such as Legionella, presenting a health risk to users of water stored within the tank.

Rapid Cure Polyurea Bund Lining »

The fuel storage bunds at RAF Marham no longer conformed to the 2001 control of pollution regulations and required lining to fully seal against the egress of fuel in the case of a spillage. Due to a large amount of cracking and movement in the substrate the lining required had to be flexible as well as resistant to the fuels stored within the tanks.

Tanking / Waterproofing »

Water leaking from plant and entering hygiene critical areas below.

« Back to services